Bridge cutting machine “Ritm” is designed for cutting natural stone blocks with dimensions of 3100*2450*790 mm into smaller workpieces, slabs or plates with thickness of 10 mm.
Cutting tool is a diamond cutting disk with a diameter up to 2200 mm, fixed on a carriage spindle, which is moving along the axle on linear guides, inserted in an oil tanks.
Cutting can be carried out both in automatic mode due to a programmable logic controller and in manual mode. The cutting program is set up using a control touch pad and does not require continuous presence of operator. In manual mode control is carried out using keyboard panel and straightness of the cut is controlled using a laser ruler.
This type of equipment guarantees high productivity and high quality of the production, is convenient in service and easy maintainable.
|Diamond disk diameter||2000 mm|
|Main drive power||18.5 kw|
|Installed power||25 kw|
|Cutting stroke of the blade||3100 mm|
|Bridge traslation||2450 mm|
|Vertical travel of the disk||790 mm|
|Carriage travel speed||0-12 m/min|
|Water consumption||90 l/min|
|Dimensions: length*width*height||4200*6600*4300 mm|
|Machine weight||4500 kg|